Making stall bars

[Dennis Yiatras]

I have a few ?

I will be using 1 1/4 dowels is this correct 2oak , 6 sch80 PVC and 5 or 6 pine and 2 2x8x8

what I need to know is drilling holes on both sides of the 2x8x8 would 6 to 10 inches from the back be good to drill the holes. Or should I go a little further out.

and how far is the top dowel offset from the back dowels. The 2 top ones will be the oak dowels.

And sch80 PVC in middle and hardwood dowels in bottom part of the stall bars

Thanks for any responses.

[Toni Laukkavaara]

you're welcome