Connor Davies Posted May 10, 2013 Share Posted May 10, 2013 So I need advice on purchasing a backyard pullup bar. At the moment I'm hanging rings off the tree out the front, which is less than ideal.... I need something I can hang rings off, high enough that I can do pullups and low enough I can do dips. I'd also like to be able to flag off the side of it, because I'm renting and I can't just install stall bars on my walls. So I have a backyard, but it's totally paved and I won't be able to bury any cement blocks or poles in the ground. I need ideas for a sturdy arrangement. I considered a power rack, as they're designed to hold 5x my bodyweight on one side, I figured I could flag off one. But the bars on power racks are always square, and I don't think they're really high enough to hang rings off... Anyone got any good (preferably cheap) ideas? Link to comment Share on other sites More sharing options...
Josh Schmitter Posted May 11, 2013 Share Posted May 11, 2013 http://www.simplifiedbuilding.com/blog/pull-up-bar-adjustable-and-portable/http://www.simplifiedbuilding.com/blog/diy-freestanding-pull-up-station-and-workout-structure/ These might help with ideas. You can pretty much make anything with pipe/fittings from a home improvement store as long as you're not doing swings or anything crazy...but I mean if you do, please have a live stream linked up to here and a copy of your will . Barring that, finding a tree/playground nearby would be your cheapest, albeit, less convenient best. Link to comment Share on other sites More sharing options...
Connor Davies Posted May 11, 2013 Author Share Posted May 11, 2013 ......Flags Link to comment Share on other sites More sharing options...
Ciaran Regan Posted July 11, 2013 Share Posted July 11, 2013 I am looking for a solution to this as well. I just built a free standing pull-up bar wood/metal combination. I'll start a thread on it. Anyway, I am trying to figure out how to add a stalling section on it for flags, as well as a dip extension..hmm Link to comment Share on other sites More sharing options...
Connor Davies Posted August 17, 2013 Author Share Posted August 17, 2013 Reviving this old thread with my revised estimates of my equipment needs. I'm envisioning something similar to monkey bars, but on their sides. Picture a ladder going up one side (for stall bars) with a set of parallel bars coming off them at the top (with a single crossbar like stall bars have.) Again, I would need to be able to flag off the side of it. Ideally it would be 100 inches total height (that's just slightly higher than my reach) and collapse-able/dismantle-able in case I have to move house so I can take it with me. I figure I can just fix it to the wall to support it while I do flags, but I'm not quite sure how to do that. So, any advice on building it? Anyone in south wales that I can pay to build it for me? Link to comment Share on other sites More sharing options...
Cody Ward Posted August 18, 2013 Share Posted August 18, 2013 Make something big so you can have your ring straps at full length Link to comment Share on other sites More sharing options...
Connor Davies Posted August 18, 2013 Author Share Posted August 18, 2013 Make something big so you can have your ring straps at full length And probably somewhere to hang rope off as well.... Link to comment Share on other sites More sharing options...
Cody Ward Posted August 18, 2013 Share Posted August 18, 2013 And probably somewhere to hang rope off as well.... Definitely. I have a rope, but I have it in my 10ft high ceiling room, so I have to go up and down a lot. Link to comment Share on other sites More sharing options...
Jake Lawrance Posted August 18, 2013 Share Posted August 18, 2013 Definitely. I have a rope, but I have it in my 10ft high ceiling room, so I have to go up and down a lot. Consider yourself lucky, mines only 6ft! and I can't even start at the very bottom of the rope Garage Gyms I tell ya! Link to comment Share on other sites More sharing options...
Cody Ward Posted August 18, 2013 Share Posted August 18, 2013 Consider yourself lucky, mines only 6ft! and I can't even start at the very bottom of the rope Garage Gyms I tell ya! Haha, yeah, I need to buy a ring tower and put it in my backyard, lol. Link to comment Share on other sites More sharing options...
Connor Davies Posted August 19, 2013 Author Share Posted August 19, 2013 So what, are we thinking about a 15ft attachment then? Should I just buy a whole gymnastics gym while I'm at it? At least then I'd have foam pits and all that other cool stuff... Link to comment Share on other sites More sharing options...
Cody Ward Posted August 19, 2013 Share Posted August 19, 2013 So what, are we thinking about a 15ft attachment then? Should I just buy a whole gymnastics gym while I'm at it? At least then I'd have foam pits and all that other cool stuff...I've actually thought about making my own small personal gym in the future. It would be fun to train whenever I want without any distractions. Of course, that would cost quite a bit of money. Ideally, you would probably want something for a ~10 ft ring setup, not including the length of your body to be able to perform a full dead hang without touching the ground. Also, you would want it to be wide enough for when you start working on iron cross in the future.I honestly don't really know much about homemade stuff, but is something like that even doable? Perhaps you could put two large 4x4s attached to a large base on the ground with a thick metal bar connecting the 4x4s? Link to comment Share on other sites More sharing options...
Connor Davies Posted August 19, 2013 Author Share Posted August 19, 2013 I've actually thought about making my own small personal gym in the future. It would be fun to train whenever I want without any distractions. Of course, that would cost quite a bit of money. I've thought about opening a public gym filled with mostly bodyweight equipment. The problem would be finding some actual customers... I think it's sad that more people don't realise how good this training is. Link to comment Share on other sites More sharing options...
Jono Posted August 25, 2013 Share Posted August 25, 2013 I saw this in someone's back garden a while ago. He (or she) seems to have the right idea Link to comment Share on other sites More sharing options...
Connor Davies Posted August 25, 2013 Author Share Posted August 25, 2013 That's just... I mean.... Link to comment Share on other sites More sharing options...
Kate Abernethy Posted August 26, 2013 Share Posted August 26, 2013 That's definitely not done by a she - we read the manuals! ;-) 1 Link to comment Share on other sites More sharing options...
Connor Davies Posted August 27, 2013 Author Share Posted August 27, 2013 But who would... they'd have to be.... Link to comment Share on other sites More sharing options...
Kate Abernethy Posted August 27, 2013 Share Posted August 27, 2013 Are you struggling to complete a sentence Bipocni? Link to comment Share on other sites More sharing options...
Jon Douglas Posted August 27, 2013 Share Posted August 27, 2013 Are you struggling to complete a sentence Bipocni? Why would you 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now