Chad Burger 3 Posted February 9, 2019 Hi all, I just finished building a set of parallel bars to use as I am just now moving to the Russian dip progression. Seem to be sturdy and are working out great so far. Cost for the wood and material was about $100. Share this post Link to post Share on other sites
Nick Murray 384 Posted February 10, 2019 Sweet! You might also need some bracing on each side: bottom left to top right, as the russian dips involve pushing backward. Is there anything under the feet? (wooden parts that extend outwards on each side). Share this post Link to post Share on other sites
Chad Burger 3 Posted February 10, 2019 12 hours ago, Nick Murray said: Sweet! You might also need some bracing on each side: bottom left to top right, as the russian dips involve pushing backward. Is there anything under the feet? (wooden parts that extend outwards on each side). Thanks Nick! I did add blocks under the corners after the picture was taken. I will take your advice a brace the posts. Share this post Link to post Share on other sites
Chad Burger 3 Posted February 10, 2019 Updated bars. 2 Share this post Link to post Share on other sites
Nick Murray 384 Posted February 13, 2019 Nice setup..I like the long parallettes! Share this post Link to post Share on other sites
Glen Ross 0 Posted January 13 Hey Chad, Nice setup. Do you have the dimensions so others can replicate? Cheers Share this post Link to post Share on other sites
Chad Burger 3 Posted January 16 Hi Glen, The bars are 4' long 1 1/2" hardwood dowel rods. The height of the posts are 50" and the space between the posts is about 19" giving about 20" space between the bars. I am 6'5" and wanted something taller so consider your height when building. Good luck and happy building. Chad Share this post Link to post Share on other sites
Glen Ross 0 Posted January 16 After reading through a few posts on the topic of DIY Parallel Bars (including this one) inspiration took hold of me and I built my own. I’m happy with the result - they’re not ‘pretty’ but they work. I’ll probably upgrade the bars to metal at some stage - there’s some flex in the pine dowel which may weaken them over time. Happy to provide dimensions if requested. Share this post Link to post Share on other sites